Magnesium oxide in the general long - term use of electric heat pipe!

Fused magnesia furnace charge of metallurgical industry, the main purpose of intermediate frequency furnace lining and coating always choose natural magnesite stone or from special grade high purity, light burning magnesium granules in electric arc furnace melting make product has high purity, crystal grain of large, compact structure, strong resistance to slag material, good thermal shock resistance, it is a very good high temperature electrical insulation materials, is also making magnesite brick, magnesia carbon brick and amorphous refractory raw materials. Electrofused magnesia is the product of magnesium melt recrystallization with high purity and less impurity. Magnesium oxide manufacturers take you to learn more!

Magnesium oxide is widely used in electric heat pipe for a long time.

After the magnesium oxide is refined, it needs to be melted at 2800 degrees so that its crystallization is completely stable and formed into blocks after cooling. Due to the influence of cohesion, the purity of the middle part is relatively high (specific gravity 3.58-3.6). This block is smashed with a hammer and then mixed with the iron chips to form the filling material magnesium oxide powder now used. The sizes of the used mesh are 40-325.

Light burned magnesia is a folding, compression, high strength, gas hard, cementitious material, widely used in national defense, medicine, chemical industry, papermaking, shipbuilding and other industries. High purity magnesite is produced by flotation purification of natural magnesite through light burning, fine grinding, pressing ball and high temperature oil calcined in shaft kiln. Is brick, indeterminate refractory materials raw materials.

The magnesite which is formed after melting in an arc furnace is called electrofused magnesite. The magnesium oxide obtained from seawater is called seawater magnesia. High purity magnesite is produced by flotation purification of natural magnesite through light burning, fine grinding, pressing ball and high temperature oil calcined in shaft kiln. Is brick, indeterminate refractory materials raw materials. Medium-grade magnesia is produced from light magnesia with MgO content of 97% by pressing ball and calcination in high temperature shaft kiln.